QA QC Manager CWI
Greenberry
- Phoenix, United States
- Mid Level
- 10+ years
- Posted
Skills
Required
- CWI
- QA/QC
- NDE/NDT
- traceability
- AWS
- Welding Inspector
- pressure testing
- WPSs
- industrial construction
Preferred
- piping
- welding
- process piping
- mechanical equipment
- specialty gases
- process utilities
- stainless steel piping
- NDE/NDT certifications
QA/QC Manager / Lead CWI
Responsibilities
- QA/QC Manager / Lead Certified Welding Inspector (CWI) to lead quality assurance and quality control activities for piping, welding, mechanical equipment installation, and related construction scopes at a high-tech semiconductor facility in Phoenix, Arizona.
- This position is responsible for implementing and maintaining project quality requirements while providing senior technical leadership for welding and piping inspection activities. The QA/QC Manager / Lead CWI will work closely with Project Management, Superintendents, General Foremen, craft leadership, client quality representatives, engineering, subcontractors, and third-party inspection personnel to ensure construction activities comply with approved drawings, specifications, codes, welding procedures, inspection requirements, and client standards.
Quality Program Leadership
- Lead day-to-day QA/QC activities for assigned project scopes.
- Implement and maintain the project Quality Control Plan, inspection processes, procedures, and documentation requirements.
- Establish clear quality expectations for Project Management, field supervision, craft personnel, subcontractors, and inspectors.
- Review contract documents, drawings, specifications, codes, client standards, and quality requirements.
- Develop and maintain Inspection and Test Plans (ITPs) as required by the project.
- Coordinate quality hold points, witness points, inspections, testing, and documentation.
- Provide technical guidance to field leadership regarding applicable quality requirements.
- Identify quality risks early and develop strategies to prevent defects and rework.
- Lead quality meetings and communicate project quality performance, issues, and corrective actions.
- Support client audits, internal audits, surveillance activities, and quality reviews.
- Lead and mentor Quality Inspectors, CWIs, and other assigned quality personnel.
Welding Quality & CWI Responsibilities
- Provide senior CWI oversight of structural and piping welding activities.
- Verify welding operations comply with applicable codes, project specifications, approved Welding Procedure Specifications (WPSs), and client requirements.
- Review and maintain WPSs, Procedure Qualification Records (PQRs), and Welder Performance Qualification Records (WPQRs) as applicable.
- Verify welder qualifications are current and appropriate for the processes, materials, positions, and work being performed.
- Perform or oversee visual inspection of weld preparation, fit-up, in-process welding, and completed welds.
- Verify proper joint preparation, alignment, root openings, consumables, preheat, interpass temperatures, and other welding requirements.
- Monitor welding consumable handling, storage, issuance, and control.
- Coordinate weld mapping, weld identification, inspection status, reject rates, and repair documentation.
- Review weld defects and support determination of appropriate repair requirements.
- Work directly with field leadership to reduce weld rejection rates and prevent recurring quality issues.
Piping Quality & Inspection
- Oversee quality activities associated with process piping, utility piping, high-purity piping, valves, supports, and equipment connections.
- Verify piping installations conform to approved drawings, P&IDs, piping isometrics, specifications, system requirements, and applicable codes.
- Verify correct materials, fittings, valves, components, orientation, routing, slopes, supports, and installation requirements.
- Maintain material identification and traceability requirements where applicable.
- Coordinate inspection of piping fit-up, welding, supports, bolting, equipment connections, and completed installations.
- Review documentation for installed piping systems and identify missing or incomplete quality records.
- Coordinate punch-list resolution and system completion activities.
- Support mechanical completion, turnover, and commissioning readiness.
NDE/NDT & Testing Coordination
- Coordinate required nondestructive examination/testing activities with qualified technicians and third-party providers.
- Review NDE/NDT reports and verify results meet project and code requirements.
- Track required examination percentages, weld status, rejects, repairs, and re-examinations.
- Coordinate radiographic, ultrasonic, liquid penetrant, magnetic particle, and other examinations as applicable to project requirements.
- Coordinate pressure testing, leak testing, flushing, cleaning, and related piping-system testing activities.
- Review test packages to verify systems are properly prepared prior to testing.
- Verify testing documentation is complete and acceptable before system turnover.
Nonconformance & Corrective Action
- Identify and document work that does not conform to drawings, specifications, codes, procedures, or client requirements.
- Initiate and manage Nonconformance Reports (NCRs) and associated corrective actions.
- Work with Project Management, engineering, field leadership, and client representatives to resolve quality issues.
- Track NCRs through final disposition and closure.
- Conduct root-cause reviews for significant or recurring quality issues.
- Develop and implement corrective and preventive actions to minimize recurrence.
- Monitor rework trends and communicate areas of concern to project leadership.
- Promote a proactive quality culture focused on preventing issues rather than simply identifying defects after installation.
Documentation & Turnover
- Ensure complete, accurate, and traceable quality records are maintained throughout construction.
- Maintain weld logs, welder qualification records, inspection reports, material documentation, NDE reports, testing records, NCRs, and other required quality records.
- Review turnover packages for accuracy and completeness.
- Coordinate documentation requirements with Project Management, Document Control, commissioning teams, and client quality personnel.
- Support system turnover, mechanical completion, commissioning, and final acceptance.
- Ensure required quality documentation is completed and submitted in accordance with project and client requirements.
Field & Client Coordination
- Maintain a strong field presence and work directly with Superintendents, General Foremen, Foremen, and craft personnel.
- Participate in construction planning meetings, coordination meetings, and client quality meetings.
- Serve as a primary quality interface with client representatives and third-party inspection personnel.
- Communicate quality issues clearly and professionally while maintaining productive working relationships.
- Coordinate inspection requirements with construction schedules to minimize avoidable delays.
- Ensure upcoming work is appropriately planned for required inspections, hold points, and documentation.
Safety & Compliance
- Perform all quality activities in accordance with Greenberry Industrial safety policies, OSHA requirements, and client-specific site requirements.
- Coordinate inspections and testing activities safely around active construction operations.
- Maintain compliance with site requirements for access, security, cleanliness, permits, PPE, and controlled work areas.
- Immediately communicate unsafe conditions identified during field inspections.
- Partner with Safety and Operations to ensure quality activities support safe execution rather than create conflicting field requirements.
Requirements
- 10+ years of QA/QC experience in industrial construction and hold a current AWS Certified Welding Inspector (CWI) certification. Strong experience with piping fabrication and installation, welding inspection, weld procedures, welder qualifications, material traceability, NDE/NDT coordination, pressure testing, and turnover documentation is required.
- The successful candidate must be comfortable working directly with field construction teams and capable of balancing rigorous quality requirements with the practical demands of a fast-paced construction environment.
- 10+ years of progressive QA/QC experience within industrial construction, piping fabrication, mechanical construction, semiconductor, advanced manufacturing, energy, petrochemical, or similarly complex environments.
- Current AWS Certified Welding Inspector (CWI) certification.
- Extensive knowledge of welding inspection and industrial piping construction.
- Strong knowledge of WPSs, PQRs, welder qualifications, weld mapping, inspection requirements, and welding documentation.
- Experience with NDE/NDT coordination and interpretation of inspection reports.
- Experience with piping inspection, material verification and traceability, pressure testing, system completion, and turnover.
- Demonstrated ability to interpret engineering drawings, P&IDs, piping isometrics, specifications, welding documentation, and quality requirements.
- Experience developing and implementing inspection plans and quality-control processes.
- Experience managing NCRs, corrective actions, inspection documentation, and turnover packages.
- Strong documentation, organization, communication, and problem-solving skills.
- Ability to communicate effectively with craft employees, field leadership, Project Management, engineering, clients, and inspectors.
- Ability to work full-time onsite in Phoenix, Arizona.
Preferred
Previous experience supporting
- semiconductor, high-tech manufacturing, cleanroom, advanced manufacturing, pharmaceutical, or mission-critical construction
- Experience with process piping, high-purity piping, specialty gases, process utilities, stainless steel piping, and mechanical equipment installation.
Previous experience serving as a
- QA/QC Manager, Quality Manager, Lead CWI, or Senior Quality Inspector on a large industrial project.
- Experience supervising CWIs and other quality personnel.
- Familiarity with applicable piping and welding standards such as
- ASME B31.3, ASME Section IX, and AWS requirements, as applicable to the assigned project.
- Additional NDE/NDT certifications or documented inspection qualifications are desirable.
- Experience working within client-controlled facilities with rigorous cleanliness, documentation, traceability, and turnover requirements.
Pay
- $50.00–$65.00 per hour, depending on experience
- $50.00–$65.00 per hour, depending on experience and qualifications.
Benefits
- Full-time employment with Greenberry Industrial.
- Opportunity to lead quality operations on a large, high-profile semiconductor construction project.
- Opportunity for continued advancement within Greenberry's Quality and Construction organizations.
Schedule / Work Environment
Full-time, onsite quality leadership position. Schedule and hours may vary based on construction activities, inspection requirements, testing, turnover schedules, and client needs.
Physical Requirements
- This position requires regular presence in an active construction environment. The employee must be able to:
- Perform physical work associated with construction inspection and field quality activities.
- Stand and walk for extended periods throughout the workday, including on uneven construction surfaces.
- Climb stairs and ladders and access elevated construction areas as required to perform inspections.
- Bend, stoop, kneel, crouch, reach, and work in varying positions while inspecting piping, welds, equipment, and construction activities.
- Safely lift and carry inspection equipment, materials, or other items weighing up to 50 pounds
- Work indoors and outdoors and in varying environmental conditions.
- Wear required personal protective equipment while working in designated construction areas.
- Safely perform inspection activities around active welding, piping installation, heavy equipment, rigging, and other construction operations.
- Reasonable accommodations may be provided to enable qualified individuals with disabilities to perform the essential functions of the position.
Where this position or portions of the work are subject to prevailing-wage requirements, wages and applicable fringe benefits will be administered in accordance with the applicable wage determination, employee classification, project requirements, and applicable law.
Equal Opportunity Employer
Greenberry Industrial is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other characteristic protected by applicable federal, state, or local law.
