jobapplier

Senior IQC Inspector

Rocket Lab Corporation

Rocket Lab Robotics specializes in high-performance robotic systems and precision mechanisms that enable the most ambitious space missions, including NASA’s Mars Perseverance Rover and CADRE lunar rovers. Leveraging Mars-proven expertise from Motiv Space Systems, we deliver scalable, flight-proven solutions – such as robotic arms, motion control systems, and solar array drive assemblies (SADAs) – to support planetary exploration, satellite servicing, and national security missions.

Based in Pasadena, California the Senior Incoming Quality Control (IQC) Inspector will support the development, qualification, and production of advanced spaceflight hardware, including robotic systems, precision electromechanical mechanisms, motion control electronics, optomechanical assemblies, and other high-reliability spacecraft components.

The Senior IQC Inspector is responsible for performing detailed incoming inspections of purchased materials, precision machined components, electronic assemblies, and supplier-provided hardware to ensure compliance with engineering specifications, purchase order requirements, and applicable aerospace quality standards.

This position requires advanced technical inspection skills, strong proficiency in interpreting engineering drawings and geometric dimensioning and tolerancing (GD&T), and the ability to independently evaluate complex mechanical and electrical components.The successful candidate will demonstrate exceptional attention to detail, sound technical judgment, and experience working in a high-mix, low-volume aerospace manufacturing environment where product conformity, traceability, and documentation are critical.

About Rocket Lab Corporation

Rocket Lab is the end-to-end space company building rockets, spacecraft, and critical subsystems that keep the world connected, protected, expand humanity’s reach to the Moon, Mars, and beyond. We move fast, build real hardware for meaningful missions, and make the impossible routine. Come shape the future with us.

At Rocket Lab, we’re not just launching rockets — we're building the future of space. Our Space Systems team builds everything from complete spacecraft, precision payloads to the components and subsystems that allow them to thrive in space, like solar panels, flight software, star trackers, optical systems, separation systems, radios, and more.

Our Space Systems team has enabled more than 1,700 missions, ranging from interplanetary exploration, in-space manufacturing to national security and defense initiatives. The team has built spacecraft, payloads, and components for missions to the Moon and Mars, working with partners including NASA, the Space Development Agency, and the U.S. Space Force. Whether it’s a single high-performance spacecraft, constellation, or the vertically integrated components that help them get to space — our world class Space Systems team is empowering some of the boldest and most ambitious space missions.

Responsibilities

Incoming Material and Component Inspection

  • Perform incoming inspections of purchased materials, components, assemblies, and supplier-provided hardware to verify compliance with engineering and procurement requirements.
  • Inspect precision machined components, mechanical assemblies, electronic components, printed circuit board assemblies (PCBAs), cables, connectors, and electromechanical hardware.
  • Review engineering drawings, specifications, purchase orders, and inspection requirements to establish applicable acceptance criteria.
  • Perform dimensional, visual, and mechanical inspections using appropriate measurement and verification equipment.
  • Verify material certifications, certificates of conformity, inspection reports, and other required supplier documentation.
  • Confirm part identification, revision levels, quantities, material specifications, and configuration requirements.
  • Inspect received hardware for workmanship defects, physical damage, dimensional discrepancies, and other conditions affecting product conformity.
  • Ensure incoming inspection activities are completed in accordance with established quality procedures and applicable customer requirements.

Precision Inspection and Metrology

  • Interpret complex engineering drawings, GD&T requirements, dimensional tolerances, and surface finish specifications.
  • Perform precision dimensional inspections using calipers, micrometers, height gauges, bore gauges, indicators, thread gauges, optical measurement systems, and other metrology equipment.
  • Utilize coordinate measuring machines (CMMs) and other advanced inspection equipment where applicable.
  • Evaluate dimensional inspection results against engineering specifications and acceptance requirements.
  • Select appropriate inspection methods and measurement equipment based on component geometry, tolerances, and technical requirements.
  • Identify measurement discrepancies and coordinate resolution of inspection-related technical issues.
  • Ensure inspection equipment is properly calibrated and suitable for its intended use.
  • Support development and improvement of inspection methods for complex or challenging components.

Electronic and Electromechanical Inspection

  • Perform visual and workmanship inspections of PCBAs, electronic components, wiring assemblies, and electromechanical hardware.
  • Verify compliance with applicable IPC, J-STD, NASA, and customer-specific workmanship requirements.
  • Inspect solder joints, connectors, wiring, component placement, mechanical interfaces, and other applicable assembly features.
  • Identify evidence of manufacturing defects, handling damage, electrostatic discharge (ESD) risks, contamination, or improper workmanship.
  • Verify part identification, date codes, lot codes, and component traceability requirements.
  • Support counterfeit electronic component prevention and detection processes.
  • Coordinate with Quality Engineering and Electrical Engineering to resolve technical questions regarding electronic component acceptance.

Material Traceability and Documentation

  • Verify that received materials and components are accompanied by required certifications, inspection records, and traceability documentation.
  • Review material certifications, special process certifications, and supplier documentation for compliance with purchase order and engineering requirements.
  • Confirm material identification, heat or lot numbers, serial numbers, and other traceability information as applicable.
  • Ensure incoming inspection results and acceptance records are accurately documented and retained.
  • Maintain inspection records within applicable ERP/MRP, quality management, or electronic documentation systems.
  • Identify missing, incomplete, or inconsistent supplier documentation and coordinate resolution with Supply Chain and Quality Engineering.
  • Support compliance with applicable aerospace material traceability and record retention requirements.

Nonconformance Identification and Control

  • Identify, document, and report nonconforming purchased materials, components, and assemblies.
  • Initiate nonconformance reports in accordance with established quality procedures.
  • Ensure suspect or nonconforming hardware is appropriately identified, segregated, and controlled to prevent unintended use.
  • Provide detailed inspection findings and supporting measurement data to Quality Engineering and Supply Chain.
  • Support investigation of supplier-related defects, documentation discrepancies, and recurring quality issues.
  • Participate in corrective action investigations and supplier quality improvement activities as requested.
  • Verify completion of authorized reinspection activities following supplier rework or corrective action.
  • Escalate significant product conformity or traceability concerns to Quality management.

Inspection Planning and Coordination

  • Coordinate incoming inspection priorities with Supply Chain, Production Control, and Manufacturing Operations.
  • Identify inspection requirements associated with critical program materials and upcoming manufacturing activities.
  • Communicate inspection status, material discrepancies, and potential delays affecting material availability.
  • Support development of incoming inspection plans, checklists, and standardized inspection procedures.
  • Assist Quality Engineering in establishing appropriate inspection methods and sampling requirements.
  • Provide input regarding inspection equipment, tooling, and resource requirements.
  • Support timely inspection and release of conforming materials while maintaining quality and compliance standards.

Quality System Compliance

  • Perform inspection activities in accordance with the organization's AS9100 Quality Management System and applicable customer requirements.
  • Maintain accurate, complete, and traceable inspection documentation.
  • Support internal, customer, and third-party quality audits.
  • Participate in continuous improvement activities related to incoming inspection processes and supplier quality.
  • Ensure adherence to established material handling, ESD control, contamination prevention, and product protection requirements.
  • Support First Article Inspection activities and review of supplier-provided AS9102 documentation where applicable.
  • Promote consistent application of quality standards and product acceptance requirements.
  • Serve as a technical resource for incoming inspection methods, precision measurement, and product acceptance requirements.
  • Provide guidance and mentorship to less-experienced inspectors.
  • Assist in developing standardized inspection practices, checklists, and work instructions.
  • Identify opportunities to improve inspection efficiency, accuracy, and repeatability.
  • Recommend improvements to inspection equipment, measurement methods, and documentation processes.
  • Support training and qualification of inspection personnel on applicable techniques and workmanship standards.
  • Collaborate with Quality Engineering and Supply Chain to identify recurring supplier defects and opportunities for improvement.
  • Maintain current knowledge of applicable aerospace inspection methods, measurement technologies, and quality requirements.

Requirements

  • Demonstrated experience inspecting precision machined components, mechanical assemblies, and/or electronic hardware.
  • Strong proficiency interpreting engineering drawings, GD&T, dimensional tolerances, and technical specifications.
  • Experience using precision measurement equipment, including calipers, micrometers, height gauges, indicators, and other metrology tools.
  • Familiarity with aerospace material traceability, configuration control, and quality documentation requirements.
  • Working knowledge of AS9100 quality management requirements and manufacturing inspection practices.
  • Ability to independently perform detailed inspections and make product acceptance or rejection decisions within established quality procedures and delegated authority.
  • Strong attention to detail, organizational skills, and technical problem-solving capabilities.
  • Ability to communicate effectively with Engineering, Supply Chain, Manufacturing, and Quality personnel.

Preferred

  • High school diploma or equivalent; additional technical education or specialized inspection training preferred.
  • 5+ years of experience in quality inspection, precision dimensional inspection, or incoming quality control within aerospace, defense, electronics, or other high-reliability manufacturing environments.
  • Experience reviewing material certifications, certificates of conformity, and supplier inspection documentation.
  • Experience identifying, documenting, and controlling nonconforming materials.
  • Experience inspecting spacecraft hardware, precision mechanisms, robotic systems, electromechanical assemblies, or other high-reliability aerospace components.
  • Experience with both mechanical and electronic component inspection.
  • Proficiency interpreting complex GD&T requirements in accordance with ASME Y14.5.
  • Experience operating coordinate measuring machines (CMMs), optical comparators, or advanced dimensional inspection equipment.
  • Familiarity with IPC-A-610, IPC/WHMA-A-620, J-STD-001, and applicable NASA workmanship standards.
  • Experience with AS9102 First Article Inspection requirements.
  • Familiarity with counterfeit electronic component prevention requirements and inspection practices.
  • Experience reviewing special process certifications, material test reports, and supplier quality documentation.
  • Experience working in high-mix, low-volume aerospace manufacturing environments.
  • Familiarity with ERP/MRP systems and electronic inspection documentation.
  • Experience supporting supplier corrective action activities and quality improvement initiatives.
  • Certification as an ASQ Certified Quality Inspector, Certified Quality Technician, or equivalent.
  • Experience mentoring or training junior inspection personnel.
  • This position may require prolonged periods of sitting, standing, walking, computer work, and occasional exposure to moderate levels of noise, dust, and fumes in production areas.

Pay

Level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.

Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company’s discretion.

$32

$40 USD

Benefits

  • Base salary is just one component of our total rewards package at Rocket Lab. Our comprehensive benefits package includes our industry-leading Employee Stock Purchase Program (with a 15% discount on company stock), top-tier medical plans (HMO, PPO, and a zero cost HDHP option with a significant HSA company contribution), dental and vision coverage, paid vacation and sick time, 11 paid holidays, flexible spending and dependent care accounts, paid parental leave, disability and life insurance, and a 401(k) retirement plan with company match.
  • Additional perks include subsidized EV charging, onsite fitness centers (where available), discounted gym memberships, complimentary snacks and beverages, 50% employee discount on our popular merch store, and a variety of other employee discounts.

WHAT TO EXPECT

We’re on a mission to unlock the potential of space to improve life on Earth, but that’s not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work, and out-pace. We pride ourselves on having each other’s backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way.

Important information

FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY

To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here

Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at [email protected].

This dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days.

FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY:

For security reasons, background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations.

Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union, or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here

ITAR Regulations.