jobapplier

Job Performer E&I

Arabian Construction Company

This job is closed: the employer no longer lists it.

Skills

Required

  • ADNOC
  • PTW system
  • E&I installation
  • SLDs
  • Hook-up drawings
  • Wiring diagrams
  • instrument calibration tools
  • pressure pumps
  • Gas

Preferred

  • LOTO
  • H2S
  • EPC or
  • technical procedures

Responsibilities

  • The Job Performer shall ensure full compliance with HSE rules, technical procedures, drawings, and ADNOC codes of practice.
  • Review Job Safety Analysis (JSA), HSE risk assessments, and toolbox talks before starting work.
  • Act as authorized Job Performer under ADNOC PTW system.
  • Ensure all isolation plans (LOTO), tags, barricading, and safety requirements are correctly implemented.
  • Coordinate with Area Authority, Issuing Authority, and Site Supervisors.
  • Perform installation, testing and commissioning of: LV/MV electrical systems Power & control cables (glanding, termination, meggering) Switchgear, MCC panels, VFDs, transformers, bus ducts Lighting systems, earthing & bonding systems
  • Carry out IR/PI tests, continuity checks, loop checks, torque tightening and inspection as per standard.
  • Perform troubleshooting of electrical equipment under supervision.
  • Carry out installation, calibration, testing and loop checking for: Field instruments (pressure, temperature, flow, level) Control valves, MOVs, analyzers, transmitters DCS/ESD/SCADA I/O systems Junction boxes, marshalling cabinets, impulse lines
  • Perform instrument tubing fabrication, routing, flushing, air-blowing and leak-test.
  • Execute SAT/FAT support activities where required.
  • Compliance & Standards Ensure all E&I work complies with: ADNOC Codes of Practice IEC/IEEE standards Project specifications, method statements, ITPs & drawings Maintain quality documentation: checklists, as-built updates, inspection reports.
  • HSE Responsibilities Ensure all work is carried out with full compliance to HSE policies.
  • Participate in hazard identification (HAZID), TBT, near miss reporting.
  • Ensure proper use of PPE, tools, equipment, and safe work practices.

Requirements

  • Strong knowledge of ADNOC PTW system (JP role).
  • Hands-on experience in E&I installation, testing, commissioning.
  • Ability to interpret P&IDs, SLDs, Hook-up drawings, Wiring diagrams.
  • Skilled in instrument calibration tools (HART communicator, pressure pumps).
  • Fault finding & troubleshooting capability.
  • Understanding of hazardous area classification (ATEX/IECEx).
  • Diploma or ITI in Electrical / Instrumentation Engineering (minimum 2–3 years program).
  • 3 – 8 years of experience in Electrical & Instrumentation construction or maintenance.
  • Minimum 3–5 years in Oil & Gas (mandatory) .

Preferred

  • ADNOC-approved Job Performer certification (preferred or must be obtained before mobilization).
  • CompEx / Hazardous Area certification (advantage) LOTO, H2S, confined space, working at height
  • EPC or Maintenance projects ADNOC Onshore/Offshore sites (Highly Preferred) Brownfield & shutdown/turnaround work